How to configure a new device
Set Device to Set Up Mode

 

  1. Press and hold switch button while plug it into wall socket.
  2. Wait until LED indicator blink purple light fast for 3 times and release the power switch.
  3. Wait until LED indicator blink purple light slowly.
  4. Device is not successfully entered into setup mode.
Set Up Device
Set up device demo video

Instruction

login1. Launch Smart Switch Application.
2. If you have created account with our application before, login in with your account.  Otherwise, create new account.

Screen Shot 2017-05-14 at 11.47.14 AM3. Open device set up page by swipe left side of screen to right side or click drawer button.

Screen Shot 2017-05-14 at 11.47.20 AM4. select “Add new device” button.

setup_device_list5. Create new profile for your device. Profile name and Wi-Fi network information is required.  The Smart Switch supports Open, WEP and WPS2 Wi-Fi security types.
setup_device_list6. Select a device you want to configure.  If the device you want to set up is not showing on the list, please try to set your device to setup mode again and select refresh button on top right corner.
setup_device_last7. After the device selection, you can change the device name as you like. And select “SETUP” button to finish the configuration.

Screen Shot 2017-05-05 at 8.58.33 PM8. When the device configuration is complete the button LED indicator will light up solid red and stay lit, and the added device view will be showing on the main screen.